How to Change the Oil on a Kawasaki Teryx: Step-by-Step Guide

Introduction
Preparing for the Oil Change
- 2.1 Elevating the Machine
- 2.2 Warming Up the Machine
Removing the Oil Filter
Installing the New Oil Filter
- 4.1 Cleaning the Filter Installation Area
- 4.2 Installing and Torquing the New Oil Filter
Refilling with Fresh Oil
Final Steps
- 6.1 Reinstalling the Oil Filter Access Panel
- 6.2 Checking the Oil Level Again
- 6.3 Finishing Touches

Introduction

In this article, we will guide you through the process of changing the oil on a 2013 Kawasaki Teryx. The oil is the lifeblood of any machine, and proper maintenance is crucial to ensure its optimal performance and longevity. Kawasaki recommends changing the oil for the first time at 20 hours or 120 miles and subsequently every 50 hours or 600 miles. This guide applies to the 2010 to 2013 models and is similar for older and newer Teryx versions as well.

Preparing for the Oil Change

2.1 Elevating the Machine

Before you begin the oil change, consider elevating your machine on ramps for better access. This step is optional but can be helpful for a more comfortable procedure. Ensure you do this in a safe manner.

2.2 Warming Up the Machine

Start the machine and let it warm up for a few minutes. Warm oil flows more freely, making the draining process more effective.

Removing the Oil Filter

3.1 Removing the Driver’s Side Seat and Dipstick Access Door

Remove the driver’s side seat and dipstick access door to gain access to the oil filter and drain plug.

3.2 Accessing and Removing the Oil Filter

Go underneath the vehicle and remove the access panel covering the oil filter. Place an oil pan beneath the filter, then use an oil filter wrench to remove the old oil filter.

3.3 Draining the Old Oil

Remove the drain plug to drain all the old oil completely. Also, replace the crush washer while the oil is draining.

Installing the New Oil Filter

4.1 Cleaning the Filter Installation Area

Clean the area where the new oil filter will be installed using contact cleaner and a rag. Ensure there is no residue or dirt.

4.2 Installing and Torquing the New Oil Filter

Apply a small amount of oil to the oil filter seal, then install the new oil filter. Torque it to 13 foot-pounds for a secure fit.

Refilling with Fresh Oil

5.1 Cleaning the Drain Plug Area

Clean the drain plug area with contact cleaner and a rag before reinstalling it.

5.2 Installing the Drain Plug and Torque Specs

Install the drain plug with a new crush washer and torque it to 15 foot-pounds.

5.3 Checking the Oil Level

Add 4 quarts of oil to the machine and start it. Let it run for a few minutes, then shut it off to double-check the oil level. Adjust the oil level as needed by adding the necessary amount to reach the correct level.

Final Steps

6.1 Reinstalling the Oil Filter Access Panel

Once the oil level is correct, reinstall the oil filter access panel.

6.2 Checking the Oil Level Again

Perform a final check of the oil level using the dipstick method. The oil level should ideally be in the middle of the crosshatch markings.

6.3 Finishing Touches

Reinstall the dipstick access cover and the driver’s side seat to complete the oil change process.

FAQ

Q1: How often should I change the oil on my Kawasaki Teryx?

A: Kawasaki recommends changing the oil for the first time at 20 hours or 120 miles and then every 50 hours or 600 miles thereafter.

Q2: Can I change the oil without elevating the machine?

A: Yes, elevating the machine is optional. However, it can provide better access and convenience during the oil change.

Q3: What is the torque specification for the oil filter and drain plug?

A: The oil filter should be torqued to 13 foot-pounds, and the drain plug should be torqued to 15 foot-pounds.

Conclusion

Changing the oil on your Kawasaki Teryx is a crucial maintenance task that ensures the longevity and optimal performance of your machine. By following this step-by-step guide, you can easily perform the oil change with confidence. Remember to adhere to Kawasaki’s recommended intervals and always consult your service manual for additional information and torque specifications.

Rerefences:

Instant Download Manuals

Download Service Repair Manuals Instantly